Leon Mk2
| Windscreen glass: Assembly overview |
| 1 - | Windscreen glass: |
| q | removing and fitting → Chapter |
| q | Windscreen repair with the windscreen repair kit -VAS 6092- → Chapter |
| q | Distance from roof: Dimension -a- = 6 mm” *0,5 mm |
| q | Determine lateral distance (dimension -d-) |
Note| Stickers affixed to windscreen (e.g. for airbag) must be re-attached at same locations on new windscreen. |
| 2 - | Bead of glue |
| q | Note differing distances from edge of windscreen: |
| t | Dimension a = 4 mm behind moulded window surround |
| t | Dimension d = 4 mm |
| t | Dimension c = 10 mm |
| q | 1-K-Adhesives 180 ML -DH 009 100 A2- |
| q | 1-K-Adhesives 300 ML -DH 009 100- |
| q | 2-K-Adhesives 400 ML -DA 004 600 A2- |
| q | Cross-section of adhesive bead |
| t | Crawler width= 7 mm |
| t | Crawler height= 11 mm |
| 3 - | Spacers |
| q | 5x |
| q | Bond onto fastening strip at equal intervals |
| 4 - | Protective strip |
| q | Only fitted with new part |
| q | Remove only after fitting windscreen and before installing plenum chamber cover |
| 5 - | Plenum chamber cover |
| q | Before installing plenum chamber cover, pull protective strip -4- out of fastening strip |
| q | First press into the fastening strip after the glass adhesive has hardened. |
