Leon Mk2
| Installation |
| For reasons of clarity, the sliding door is shown removed. |
| Door arrester |
| – | Check that stop buffer -3- is correctly seated. |
| – | Push door arrester -1- towards rear as far as it will go. |
| – | Tightening torque for the bolts -2-: 20 Nm. |
| End plate for lower guide rail |
| – | Push end plate -4- onto guide rail -5- as far as stop -arrow-. |
| – | Tightening torque for the bolts -6-: 20 Nm. |