Leon Mk2
Assembly overview |
Note
Observe the markings on locking pegs -1- and catch plates -4-. |
1 - | Locating peg |
q | At top and bottom on sliding door |
q | Removing → Chapter |
q | Installing → Chapter |
q | Set |
2 - | Bolt. |
q | 2 per locking peg |
q | Tightening torque: 8 Nm |
3 - | Grommet |
4 - | Catch plate |
q | At top and bottom on B-pillar |
q | Removing → Chapter |
q | Installing → Chapter |
q | The catch plates cannot be adjusted. |
5 - | Bolt. |
q | 2 per catch plate |
q | Tightening torque: 20 Nm |
6 - | Arrester |
q | Tightening torque: 55 Nm |