Leon Mk2
Removal: |
Carry out the following work: |
– | Remove sliding door trim → General body repairs, interior; Rep. gr.70. |
– | Remove cover → Chapter |
– | Removing cover cap → Chapter |
– | Remove door handle → Chapter. |
– | Unscrew bolt -2- and remove seal. |
– | Remove bearing bracket -1- from door. |
Note
Bowden cables can be detached if this is necessary for subsequent work. |
Detaching Bowden cable leading to door lock |
– | Release the holding device -3- and swivel the holding device -3- out of mounting in bearing bracket -arrow a-. |
– | Lift cable bolt out of mounting -arrow c-. |