Leon Mk2
| Adjusting shut line |
Note| t | Make sure that the hinge fitting -1- is not twisted when adjustment is being carried out. |
| t | When the sliding door is being opened, special attention must be paid to the free movement of the seal or trim strip of the side window -arrow c- |
| – | In order to adjust the shut line -arrow a- of the sliding door-3-, the screws -2- of the hinge must be loosened. |
| – | Adjust shut line of sliding door -arrow a-. Make sure that the hinge fitting is not twisted in the process. |
| – | Tighten the bolts of the hinge fitting, tightening torque: 20 Nm. |
| – | Check the adjustment. Also adjustment of flushness. |
