Leon Mk2
| Assembly overview - sliding door locking and release components |
Note| The components for the left side of the vehicle are shown. The right side of the vehicle is analogous. |
| 1 - | Mounting bracket |
| q | removing and fitting → Chapter |
| 2 - | Bolt for bearing bracket |
| q | Tightening torque: 4.5 Nm |
| 3 - | Exterior door handle |
| q | removing and fitting → Chapter |
| 4 - | Panel |
| 5 - | Interior opening mechanism |
| q | removing and fitting → Chapter |
| 6 - | Door control unit |
| 7 - | Wiring |
| 8 - | Bowden Cable |
| q | From interior opening mechanism to arrester |
| 9 - | Wiring guide |
| q | From body to sliding door |
| 10 - | Bowden Cable |
| q | From distributing mechanism to arrester |
| 11 - | Bowden Cable |
| q | From distributing mechanism to door lock |
| 12 - | Door lock |
| q | removing and fitting → Chapter |
| 13 - | Bowden Cable |
| q | From interior door handle to door lock |
| 14 - | Distributing mechanism |
| q | Distributes the Bowden cable from bearing bracket to rotary latch and to door lock |
| q | removing and fitting → Chapter |
