SEAT Workshop Service and Repair Manuals > Leon Mk2 > Body | Bodywork, exterior installation work | Sliding roof | Panorama roof

Blind roller adjustment

Special tools and workshop equipment required

t	Torque wrench kit -SAT 8010-

t	Lever -U 30800-

Adjusting

Note

To prevent the roller from twisting or not rolling straight, fitting must include ensuring that the material in the roller is not creased or damaged.

–	Removing glass cover → Chapter.

–	Unscrew the bolts -1-, -2- and -3-.

–	Slowly close the roller of the sun blind completely.

Note

While the roller blind is closing, the guide brackets fastening the roller adjust to the correct position.

–	From inside and outside the vehicle, check that the material in the roller is not creased, folded or damaged.

Check that there are no faults, and tighten the bolts further, starting from -1-, going on to -2- and ending at -3-.

–	Make a final visual check.

–	Tighten to a final torque of 3.5 Nm.

–	Mount glass cover → Chapter.

SEAT Workshop Service and Repair Manuals