seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Adjusting rear glass panel > < Checking height adjustment
Adjusting front glass panel
Adjusting front glass panel
  Note
The glass panel height adjustment is performed after the glass panel has been closed from slide open position.
–  Remove trims → Chapter.
   
–  Only undo the two front screws -2- on the left and right,
–  Close glass panel.
  M60-10003
–  Adjust glass panel -1- according to illustration.
t  Dimension -a-: 1.5 ±1 mm
t  Dimension -b-: 1 ±1 mm
–  Insert and tighten screws on left and right, 5 Nm.
–  Installing trim → Chapter.
  M60-0076

Adjusting rear glass panel > < Checking height adjustment