Leon Mk2
Checking height adjustment |
Note
t | Front glass panel must only be adjusted at front edge -3- and rear glass panel at rear edge -1-. |
t | To achieve the best possible optical appearance, ensure that adjustments on left and right are as far as is possible uniform (symmetric). |
t | Arrow -d- points in direction of normal travel. |
Checking height adjustment |
– | Using a depth gauge, check the setting of the front glass cover -3- and rear glass cover -1-. |
t | Dimension -a-: 1 ±1 mm |
t | Dimension -b-: 1 ±1 mm |
t | Dimension -c-: 1.5 ±1 mm |
If measured values differ from specifications, respective glass panel must be adjusted. |
t | Adjusting front glass panel → Chapter |
t | Adjusting rear glass panel → Chapter |