seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing and installing front glass panel|Installation > < Removing and installing front glass panel
Removal:
   
Removal:
–  Open glass panel -1- until trim -1- is accessible.
–  Release locking lugs -4- by pressing -arrow B- on rear -3-.
–  Pull trim -1- off downwards at rear end -arrow A-.
–  Push trim forwards -arrow C- and remove.

   
–  Unscrew bolts -2- from glass panel -1- on left and right.
  Note
To unscrew bolts, use a magnetic tool so that bolts do not fall into mechanism of panoramic sliding roof.
–  Lift out glass panel -1- upwards.
  Caution
To avoid damaging wind deflector, do not move tilting mechanism when glass panel is removed.

   

Removing and installing front glass panel|Installation > < Removing and installing front glass panel