Leon Mk2
| Removal: |
Note| In the event of power failure, sun blind can be moved by turning sun blind motor with a commercially available hexagon key to removal position (fully open). → Chapter |
| – | Open sun blind completely. |
| – | Remove rear glass panel → Chapter. |
| – | Undo and remove screws -3- of cover -2-. |
| – | Release catch -arrow- of cover -2- from the rear section -4- using a screwdriver. |
| – | Fold up cover -4-. |
| Interior seal -1- does not have to be removed for this. |
| – | Carefully lift sun blind cross strut -2- together with sun blind slide -1-. |
Note| When doing so, make sure that the blind material is not damaged. |
| – | Pull sun blind slide -1- sideways in direction of -arrow- and out of sun blind cross strut -2-. |
| – | Remove moulded headliner → General body repairs, interior; Rep. gr.70. |
| – | Undo screws -2- of sun blind housing -1- |
| – | Pull sun blind housing -1- downwards a little in -direction of arrow-. |
| – | Pull sun blind housing -2- together with sun blind steel strap -3- in direction of -arrow- out of sun blind rail -2-. |
Note| Proceed carefully so that the blind material is not damaged. |
| Sun blind cross strut can be renewed when sun blind is removed → Chapter. |
