Leon Mk2
| Installing exterior seal |
Note| To guarantee a good bonding of seal, do not bond at a temperature below 20°. |
| – | Bonding surface on glass panel must be free of dust and grease. |
| – | Clean complete bonding area with cleaning solution -D 009 401 04-. |
| – | Pull protective film -3- off adhesive tape of new seal -2- and press seal on at corners and ends. |
| – | If the seal is excessively long, any excess length is evenly compressed. |
| – | Press seal on evenly all round using roller -3356-. |
| – | Install rear glass panel → Chapter. |