SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing sealing bellows >
< Removing and installing sunroof headliner
Leon Mk2
Body
Bodywork, exterior installation work
Sliding roof / Servicing sliding/tilting sunroof
Removing and installing decorative trim
Removing and installing decorative trim
Removing and installing decorative trim
Removal:
–
Open sunroof to tilt position.
–
Push back sliding headliner as far as it will go.
–
Unclip lower cover -1
-A-
from catch in direction of arrow and slide toward front - arrow
-B-
–
Pull lower trim off retainer rail towards centre of vehicle.
–
Unclip trim
-2-
at front and in centre and detach in direction of arrow.
Installation
–
Press lower trim
-1-
onto upper edge
-arrows-
of mounting rail
-2-
.
–
Press lower trim
-1-
backwards in direction of arrow until the locating hook locks into actuator
-2-
.
–
Install upper cover on slot guide with pressure.
Body
Bodywork, exterior installation work
Sliding roof / Servicing sliding/tilting sunroof
Removing and installing decorative trim
Removing and installing sealing bellows >
< Removing and installing sunroof headliner