seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing trim for heating and air-conditioning control system > < Removing and installing side panel trims for footwell

Leon Mk2

Removing and installing dash panel end trims
Removing and installing dash panel end trims
  Note
Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.
Removing
–  Bend beading of door seal outwards in area of dash panel cover.
   
–  Prise cover on side of dash panel -1- outwards out of fasteners using removal wedge -3409-.
Installing
  Note
There are 4 metal clips on the inside of the dash panel cover. If metal clips become stuck in the mountings of the dash panel when the dash panel cover is removed, the metal clips must be pulled off the dash panel. The metal clips must then be placed on the dash panel cover again.
–  Install in reverse order of removal.
  N68-10497

Removing and installing trim for heating and air-conditioning control system > < Removing and installing side panel trims for footwell