seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Head airbag: general fitting notes (2 door vehicles) > < Airbag control unit J234 : removing
Airbag control unitJ234: fitting
Airbag control unit -J234-: fitting
Fit in the reverse order to removal, but note following:
–  Switch off all electrical components.
–  Switch ignition on.
–  Close vehicle windows.
  DANGER!
On connecting the battery earth cable, ensure that there is no-one inside the vehicle .
–  Connect battery earth cable.
  Note
   
If, after assembly, the airbag warning light -K75- lights up, the fault memory must be erased using the -VAS 505X-. After erasing the memory, consult the fault memory again .
  E69-10069

Head airbag: general fitting notes (2 door vehicles) > < Airbag control unit J234 : removing