Side impact airbag sensor for driver/passenger: fitting
Side impact airbag sensor for driver/passenger: fitting
Side impact airbag sensor for driver/passenger: fitting
Installation is carried out in reverse order. The following should be taken into account:
–
Switch off all electrical components.
–
Switch ignition on.
–
Close the doors.
WARNING
On connecting the battery earth cable, ensure that there is no-one inside the vehicle .
–
Connect battery earth cable.
Note
If, after assembly, the airbag warning light -K75- lights up, the fault memory must be erased using the central diagnosis -VAS 505X-. After erasing the memory, consult the fault memory again .