Leon Mk2
| Front safety belt with tensioner (4 door vehicles): general installation diagram |
| 1 - | Vertical belt regulator |
| q | Removing and fitting → Chapter |
| 2 - | Hexagonal bolt |
| q | 40 Nm |
| 3 - | Pillar loop |
| 4 - | Bolt |
| q | 8 Nm |
| 5 - | Seat belt automatic device |
| q | Removing and fitting → Chapter |
| q | Two different tensioner types are mounted: |
| t | Electrical tensioners for vehicles with side airbag |
| t | Mechanical tensioners for vehicles without side airbag |
| t | If the hexagonal bolt is loosened → Item, the tensioner will lock, and if it is tightened it is activated for operation ( except in the case of electric tensioners) |
| t | The removal of used components which have not triggered is carried out by the Distribution Centres or the Importer |
| 6 - | Seat belt guide |
| q | Fastened with 2 Philips screws |
| q | 1.5 Nm |
| 7 - | Hexagonal bolt |
| q | 40 Nm |
| 8 - | Front fitting |
| q | Removing and fitting → Chapter |
| 9 - | Front seat belt buckle |
| q | Removing and fitting → Chapter |
