seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Backrest heating element: Fitting > < Backrest heating element: Removing and fitting

Leon Mk2

Backrest heating element: removing
Backrest heating element: removing
  Note
t  Before working with the airbag system, always read the safety precautions → Chapter.
t  Pay attention to coding (obtain as necessary) for vehicles with coded radio/radio navigation system (RNS).
–  With ignition switched off, disconnect earth connection from battery.
–  Remove the front seat → Chapter.
  Note
The side airbag adapt. -VAS 5232- should be always connected in the dismounting procedure.
   
–  Position the rear seat in the seat bracket -T20172/5-.
–  Remove the front seat back → Chapter.
  E74-10018
–  Remove the rear seat bench from the seat bracket -T20172/5- and position the rear seat backrest.
  E74-10017
–  Remove the rear seat backrest upholstery → Chapter.
–  Detach connector -5-.
–  Insert the cable -1- through the opening -2- of the central element of the padding -3- and remove the heating element -4-.

   

Backrest heating element: Fitting > < Backrest heating element: Removing and fitting