Leon Mk2
|
– | Press the foot rest -1- out of their mountings in seat frame using the removal wedge -3409-. |
– | Open the zip -2- starting at the back. |
– | Lift the cover -3- up to the seat bench. |
– | Unscrew the nuts -5- (10 Nm) and remove the seat bench -1- with mountings -2- and -3- from the seat frame. |
– | Remove the stretch cover -4- from the seat frame. |
– | Remove the clips -4- from the seat pan. |
– | Remove the profile -3- from the seat pan. |
– | Remove the cover -1- and padding -2- from the seat frame. |
– | Take cover -1- off padding -2-. |
– | Remove the profile -2- from the trim. |
– | Remove the profile -3 - from both sides of the child seat adjustment unit. |
– | Remove all padding clips -5- on both sides as well as at the back. |
– | Remove the cover -1- from its mount -4-. |
– | Push the cover -1- up over the padding -4- until the clips -2- and -3- can be accessed. |
Note
The outer clips -3- are joined to the child seat adjusting unit -5-. |
– | Remove all clips -2- and -3-. |
– | Remove the cover -1- and padding -4- from the child seat adjusting unit -5-. |
Note
|