Leon Mk2
|
– | Push the left part of the rear seat to the front as far as possible. |
– | Press the respective button on the head retainer guiding -3- and remove the head support of the load-through hatch / centre armrest unit. |
– | Unscrew the bolt -1-. |
– | Fold the armrest -2- forwards as shown in the illustration -arrow A- (by about 50°). |
– | Remove the armrest upwards out of the mount of the armrest -arrow B-. |
Note
The armrest -2- can only be removed when located in the position shown in the figure. |
Installing |
Installation is carried out in reverse order. The following should be taken into account: |
– | Tighten bolt -1- to torque of 20 Nm. |