seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear door trim: > < Dash panel insert, removal
Dash panel insert, assembly
Dash panel insert, assembly
Installation is carried out in reverse order. The following should be taken into account:
   
–  When fitting the dash panel insert ensure that the clips -1- fit correctly into their corresponding places on the lower part of the dash panel insert.
–  Switch on the ignition.
–  Close the doors.
–  Connect battery earth cable.
  WARNING
On connecting the battery earth cable, ensure that there is no-one inside the vehicle .
  Note
t  On reconnecting battery, remember to activate vehicle equipment (radio/radio navigation system, clock, electric window lifters) in line with → Instruction Manual.
  A70-1219
t  If, after assembly, the airbag warning light -K75- lights up, the fault memory must be erased using the central diagnosis -VAS 505X-. After erasing the memory, consult the fault memory again .
  E69-10068

Rear door trim: > < Dash panel insert, removal