–
| Lift the security tab -2- with the help of a lever -U 30800- and remove the pressure spring from the spherical heads. |
Note t
| From chassis no.. 5P5 5R 097 607► there are vehicles that are fitted with a washer -4-. For the removal, remove the upper bolt -1-. Tightening torque: 14 Nm. |
t
| If the gas pressure spring is re-used, the security tab -2- must not be removed completely from the ball joint, because the security tab may be damaged. |
–
| Separate the trim → Item using the lever -U 30800- from the protective guide → Item. |
|
|
|