Leon Mk2
| Upper A-pillar trim: Assembly overview |
WARNING
|
| 1 - | Upper A-pillar trim |
| q | Removing and installing → Chapter |
| 2 - | Bolts (2 each) |
| q | Tightening torque: 4 Nm |
| q | Self-locking |
| q | Always renew if removed |
| q | Threaded holes for bolts must always be cleaned (e.g. with a thread tap). |
| 3 - | Clips (3x) |
| 4 - | Flap for roof grab handle |
| 5 - | Roof grab handle |
| 6 - | Retainers |
| 7 - | Groove |
| 8 - | Seal |
| q | Make sure seal is properly positioned after fitting trim. |
| 9 - | Airbag label |
| 10 - | Retainer |
