Leon Mk2
| Sunroof lining: general overview |
| 1 - | Sliding / tilting sunroof trim: |
| q | Depending on the version → Spare parts catalogue |
| q | Removing and installing → Chapter |
| 2 - | Cap |
| 3 - | Sunshade fastening bolt |
| q | 2 ± 0.2 Nm |
| 4 - | Sunshade movable fastening |
| 5 - | Sunshade |
| q | Depending on the version → Spare parts catalogue |
| q | Removing and fitting |
| 6 - | Cap |
| 7 - | Sunshade fixed fastening |
| 8 - | Blind rivet nut |
| q | Depending on the version → Spare parts catalogue |
| 9 - | Support unit |
| q | Depending on the version → Spare parts catalogue |
| q | removing |
| – | Remove the interior roof moulding of the roof to be opened → Chapter. |
| – | Unscrew the screws -10- and remove the mounting unit -9-. |
| q | Installation |
| Installation is carried out in reverse order. |
| 10 - | Bolt |
| q | 8 Nm |
| q | Depending on the version → Spare parts catalogue |
| 11 - | Clip |
| q | 3 off |
| 12 - | Fixing cover for the power network |
| q | Depending on the version → Spare parts catalogue |
| 13 - | Bolt |
| q | 20 Nm |
| q | Depending on the version → Spare parts catalogue |
| 14 - | Panel |
| q | Depending on the version → Spare parts catalogue |
| 15 - | Bolt |
| q | 8x |
| q | 2 ± 0.2 Nm |
| 16 - | Grab handle |
| q | 4x |
| q | Removing and fitting → Fig. |
| 17 - | Front interior light |
| q | Removal and installation → Electrical system; Rep. gr.96 |
| 18 - | Bolt |
| q | 2 off |
| q | 2 ± 0.2 Nm |
