SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Lower lining of the strut A: installing >
< Lower lining of the strut A: removing and installing
Leon Mk2
Body
Bodywork, Interior fitting work
Trim, noise insulation
Strut linings and side linings / wer_lining_of_the_strut_a_removing_and_installing/">Lower lining of the strut A: removing and installing
Lower lining of the strut A: removing
Lower lining of the strut A: removing
Lower lining of the strut A: removing
Note
Removal and assembly will be carried out taking into consideration small differences depending on the vehicle's equipment.
–
Introduce the lever -U 30800- in the upper part of the switch casing and uncase it by prizing carefully.
–
Separate the connector.
–
Dismount the front bonnet unlocking activation lever
-4-
→ Front bonnet, Activation lever: removing and fitting; Rep. Gr.55
–
Detach the clips
-3-
from the upper part of the lining
-1-
.
–
Detach the clips
-3-
from the lower part of the lining
-1-
.
–
Remove the lower lining of strut A
-1-
.
Body
Bodywork, Interior fitting work
Trim, noise insulation
Strut linings and side linings / wer_lining_of_the_strut_a_removing_and_installing/">Lower lining of the strut A: removing and installing
Lower lining of the strut A: removing
Lower lining of the strut A: installing >
< Lower lining of the strut A: removing and installing