seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Rigidity strip: fitting > < Rigidity strip: removing and fitting

Leon Mk2

Rigidity strip: removing
Rigidity strip: removing
  Note
   
The windscreen trim -3- is encased in a guide rail below the windscreen.
–  Remove the windscreen wiper arms -1- → Windscreen wiper; Windscreen wiper: Removing and fitting; Removing the windscreen wiper arms; Rep. Gr.92.
–  Remove the rubber gasket -2-.
–  Removing the windscreen trim -3- from the crystal edge with the lever -U 30800-, starting from the left end.
–  Remove the windscreen trim -3- forwards.
  E92-0048
–  Remove hexagonal bolt -1-.
–  Remove the bolt with incorporated washer -2-.
–  Remove the cover, driver's side footwell area → Chapter.
  E48-10019
–  Remove the hexagonal bolt -4-.
–  Remove the rigidity strip -3-.
  E48-10020

Rigidity strip: fitting > < Rigidity strip: removing and fitting