SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Steering column support unit: fitting >
< Steering column support unit: removing and fitting
Leon Mk2
Body
Bodywork, Interior fitting work
Trim, noise insulation
Transverse support / eering_column_support_unit_removing_and_fitting/">Steering column support unit: removing and fitting
Steering column support unit: removing
Steering column support unit: removing
Steering column support unit: removing
–
Dismantling dash panel insert
→ Chapter
.
–
Unscrew the nut
-arrow-
and extract the earth wire.
–
Release the cable guide
-2-
on the steering column and take the cable harness out
-1-
.
–
Remove the cable attachments
-3-
from the steering column pulling in the direction of the
-arrow-
.
–
Open the cap
-2-
of the cable guide
-1-
and take out the cable harness
-3-
.
–
Remove the cable attachments
-4-
from the steering column pulling in the direction of the
-arrow-
.
–
Remove the hexagonal screw
-4-
from the steering column.
–
Remove hexagonal bolts
-2-
.
–
Remove the steering column and leave it in the interior floor.
–
Unscrew the hexagonal bolt
-2-
.
–
Remove hexagonal bolts
-3-
.
–
Unscrew the hexagonal bolts
-2-
and remove the steering column bracket unit
-1-
.
Body
Bodywork, Interior fitting work
Trim, noise insulation
Transverse support / eering_column_support_unit_removing_and_fitting/">Steering column support unit: removing and fitting
Steering column support unit: removing
Steering column support unit: fitting >
< Steering column support unit: removing and fitting