Leon Mk2
Assembly overview - lid lock |
1 - | Retaining clip |
2 - | Handle |
q | Removal: |
– | Remove rear lid trim: → General body repairs, interior; Rep. gr.70. |
– | Remove lock → Item. |
– | Disconnect connections. |
– | Remove lock cylinder housing -7- → Chapter. |
– | Unscrew bolt -9- and take handle out of lid. |
q | Installation: |
– | Installation is carried out in the reverse order. |
3 - | Bolt |
q | Qty. 3 |
q | 8 Nm |
4 - | Lock |
q | Removal: |
– | Remove rear lid trim: → General body repairs, interior; Rep. gr.70. |
– | Disconnect connector from lock. |
– | Unscrew bolts -3- and remove lock from lid. |
5 - | Central locking control motor |
q | Removing and installing: → Chapter. |
6 - | Bolt |
q | Qty. 2 |
q | 6 Nm |
7 - | Lock cylinder housing |
q | Removing and installing → Chapter |
8 - | Anti-theft plate |
q | Vehicles with appropriate equipment only. |
9 - | Bolt |
q | 6 Nm |