Leon Mk2
Assembly overview - front bumper |
1 - | Cover |
q | Material: PP/EPDM. |
q | Removal: |
– | Remove Torx screws -10-. |
– | Remove Torx screws -11-. |
– | Pull the cover off the guides -9- and remove retainers -6- (left- and right-hand sides). |
– | Renew any broken retainers → Chapter. |
2 - | Torx screw |
q | Specified torque: 15 Nm |
q | Qty. 2 |
3 - | Impact absorber |
4 - | Torx screw |
q | Specified torque: 15 Nm |
q | Qty. 4 |
5 - | Bumper carrier |
q | When dismantling, firstly remove the radiator grille with trim frame: → Chapter. |
6 - | Retainer for cover |
7 - | Hexagon bolt |
8 - | Cross-head screw |
9 - | Guide |
q | To remove/install bumper, pull out or push in parallel to guides at left and right. |
10 - | Torx screw |
q | Connects cover to wheel housing liner. |
11 - | Torx screw |
12 - | Spoiler |
q | Clipped into cover. |
q | Is not necessary to remove when removing the cover. |