seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Adjusting height of sunroof glass panel > < Checking parallel running

Leon Mk2

Adjusting parallel running
Adjusting parallel running
l  Glass panel for sliding/tilting sunroof is closed.
–  Move back sliding headliner and trim frame fully.
–  Remove cover from drive unit.
–  Remove drive. Always use new screws (securing screws are microencapsulated); specified torque 3Nm.
  Note
The drive pinion must no longer be in mesh with the cables.
   
–  Only move rear guides from the front to the rear between the notches -arrows-.
–  Pegs -3- must be within the marks (notches) -arrows-. Retaining hooks -4- must be engaged in the guide rails.
  V60-0578

Adjusting height of sunroof glass panel > < Checking parallel running