Leon Mk2
Checking electric drive (zero position) |
Note
If electric drive is renewed, unit must be installed in zero position (sliding/tilting sunroof panel closed). |
– | Join connecter between electric drive and sliding/tilting sunroof wiring harness. |
– | Operate switch -1- and count rotations of drive pinion -2-: The -0- position of the electric drive lies between the end switch-off points -A- and -B-. The end switch-off point -B- is obtained by turning drive pinion clockwise and the end switch-off point -A- by turning it anti-clockwise. |
-A- End switch-off point, panel in tilted position = 2 turns to zero position. |
-B- End switch-off point, panel in sliding position = ∼8.25 turns to zero position. |