seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing cover, driver side ? 05.00

Leon Mk2

Removing
Removing
   
–  Unclip cover for relay plate -1- and pull out.
  N70-0182
–  Pull out lower cover for relay plate -1-.
  N70-0183
–  Remove cross-head screws -arrows-.
–  Pull off door seal -3- in area of dash panel.
–  Lever out spreader pin from clip -2-.
–  Pull clip -2- out of hole.
–  Unclip cover on driver side -1- along upper edge from dash panel, pull off connector for footwell light and remove cover.
  N68-0249

Installing > < Removing and installing cover, driver side ? 05.00