seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing upper steering column trim > < Removing and installing dash panel insert trim

Leon Mk2

Removing and installing dash panel trim (passenger side)
Removing and installing dash panel trim (passenger side)
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1783-
Removal
  W00-0990
–  Switch off ignition.
–  On front passenger side remove cover for dash panel to side → Chapter.
–  Remove middle dash panel trim → Chapter.
–  Remove centre console: → Chapter.
–  Remove A-pillar trim → Chapter.
–  Remove bolts -1- (1.5 Nm).
–  Release dash panel cover -2- from dash panel and remove.
–  Disconnect wiring harnesses and plug as you do so, depending on vehicle equipment level.

Installation
  Note
Before installing, check all fasteners for damage and renew if necessary.
–  Installation is carried out in reverse order.
–  All mountings for the cover must be properly engaged in the dash panel with the retaining clips -3-.
   

Removing and installing upper steering column trim > < Removing and installing dash panel insert trim