Leon Mk2
| Airbag unit, passenger's side: removal and installation |
| 1 - | Airbag unit, passenger's side |
| t | Removal |
| 2 - | Support frame |
| t | Must be replaced if airbag has been triggered |
| 3 - | Connector |
| t | Clipped to the instrument panel with a support |
| 4 - | Ground cable |
| 5 - | Passenger's side shelf |
| 6 - | Star-head screw |
| Removal |
| – | Disconnect the battery earth strap. |
| – | Remove the passenger's side shelf → Chapter |
| Remove bolt -6- and remove airbag unit -1- (do not forget the upper bolts -arrows-). |
| Release ground cable -4- from the airbag housing. |
| – | Release the connector -3- from its support, disconnect it and remove airbag unit -1-. |
| Installation |
| – | Fit airbag unit. |
| – | Disconnect all current consumers. |
| – | Switch on ignition. |
Caution
|
| – | Connect the battery earth strap |
