Leon Mk2
| Assembly overview - seat belt, third seat row |
| 1 - | Cover |
| q | Old version |
| q | Unclip |
| 2 - | Hexagon bolt |
| q | 40 Nm |
| 3 - | Seat belt with belt anchor |
| q | Old version |
| 4 - | Hexagon bolt |
| q | 40 Nm |
| 5 - | Cover |
| q | New version |
| 6 - | Seat belt with belt anchor |
| q | New version |
| 7 - | Belt guide |
| 8 - | Cross-head screw |
| q | 1.5 Nm |
| 9 - | Belt inertia reel |
| q | To remove, rear left side panel trim must first be removed and housing for heater or air conditioner must be loosened on vehicles with passenger compartment heater or air conditioner |
| q | Retaining lugs determine position of belt inertia reel |
| 10 - | Hexagon bolt |
| q | 40 Nm |
| 11 - | Support for belt hook |
| q | Support is clipped into rear side panel trim |
| 12 - | Belt hook |
| 13 - | Belt catch |
| 14 - | Hexagon bolt |
| q | 40 Nm |
| 15 - | Mounting plate |
| q | On vehicles with air conditioner, belt catch is turned by 180° on left-hand side for installation |
| 16 - | Belt latch |
| q | To remove belt latch, trim on seat must first be removed → Chapter Removing and installing rear backrest |
| 17 - | Hexagon bolt |
| q | 40 Nm |
