Leon Mk2
Seat back: removal and installation |
1 - | Safety washer |
2 - | Torx screw |
q | 4 Nm |
q | Self-locking |
3 - | Socket |
4 - | Expanding bolt |
5 - | Casing |
6 - | Lining |
q | Removal: |
– | Remove seat back → Anchor |
– | Remove star-head screw → Item |
– | Remove Torx screw → Item and bush → Item |
– | Lift rear upholstery above the bush bolts and push forward |
7 - | Star-head screw |
8 - | Regulating button |
9 - | Spacer |
10 - | Bush bolts |
11 - | Actioning lever |
q | Only for foldable seat back |
12 - | Securing hook |
Removal |
– | Removing the seat → Chapter |
– | Remove regulating button → Item and spacer → Item |
– | Press expanding bolts inwards → Item (on the left and right). The bolts which contact the seat frame or the padding can be removed by pressing down with a screwdriver |
– | Remove the seat back frame cover → Item (on the left and right) |
– | Release the seat heating cables from the frame |
– | Remove the safety washer -1- (on the left and right) |
– | Unlock the securing hook -12- and fold the seat back forwards |
– | Remove the bush bolts -10- from the seat back frame (on the left and right) |
Installation |
Install in reverse order. |
Note!
Fit the lining -6- before fitting the seat back. |