| –
| Remove securing clips → Item from door mountings. |
| –
| Remove defective securing clips from door trim. |
Note | Securing clips damaged from removal must be renewed. |
| –
| Insert securing clips in clip holders → Item of door trim. |
| –
| Fit wiring harnesses to door trim. |
| –
| Engage cable for interior door handle. |
| –
| Engage trim in window aperture. |
| –
| Push trim in mountings in lower area. |
| –
| Push trim in mountings at sides. |
Caution | Ensure that all securing clips are located in the relevant mountings. The clips are located correctly when the door trim is fully in contact with the door at the sides and lower edge. |
|
| –
| Further installation is performed in the reverse order of removal. |
|
|
|
