SEAT Workshop Service and Repair Manuals > Leon Mk2 > Body | General body repairs, interior | Trim, noise insulation | Luggage compartment lining | Tailgate trim, ST models: Removing and installing.

Tailgate trim, ST models: Removing and installing.

Special tools and workshop equipment required

t	Release lever -T20043-

t	Release lever -U 30800-

Removal:

–	Open rear lid.

–	Detach the lining -2- from the clips -1- and remove from the tailgate using the lever -T20043- or lever -U 30800-.

The cover -3- must not be removed.

Installation

Installation is carried out in the reverse order. When installing, note the following:

Note

Before fitting the lining check the condition of the clips and replace if necessary.

SEAT Workshop Service and Repair Manuals