Leon Mk2
Removing and installing rear lid trim 06.00 ► |
1 - | Rear lid trim |
q | Removing: |
– | Remove trim frame for rear lid ► 06.00 → Chapter |
– | Lever out caps → Item |
– | Remove cross-head screws → Item |
– | Lever out caps → Item |
– | Remove cross-head screws → Item |
– | Swing out trim in lower area slightly and pull out upwards off clips → Item |
q | Installing: |
– | Fit trim panel → Item in clips → Item |
– | Clip in trim → Item |
– | Secure trim with cross-head screws → Item |
– | Clip in cap → Item |
– | Install trim frame for rear window 06.00 ► → Chapter |
2 - | Cover |
3 - | Clip |
q | Check for damage and if necessary renew before fitting trim panel |
4 - | Felt strip |
5 - | Spreader nut |
q | Check for damage and if necessary renew before fitting trim panel |
6 - | Cross-head screw |
7 - | Trim |
8 - | Cross-head screw |
9 - | Cover |