Leon Mk2
| Removing and installing rear lid trim ► 05.00 |
| 1 - | Rear lid trim |
| q | Removing: |
| – | Remove trim frame for rear lid ► 05.00 → Chapter |
| – | Lever out caps → Item |
| – | Remove cross-head screws → Item |
| – | Swing out trim in lower area slightly and pull out upwards off clips → Item |
| q | Installing: |
| – | Insert clips → Item in mountings → Item |
| – | Insert spreader nuts → Item in mounting holes of rear lid |
| – | Fit trim panel → Item in clips → Item |
| – | Clip in trim → Item |
| – | Secure trim with cross-head screws → Item |
| – | Install trim frame for rear lid ► 05.00 → Chapter |
| 2 - | Clip |
| q | Check for damage and if necessary renew before fitting trim panel |
| 3 - | Mounting |
| 4 - | Felt strip |
| 5 - | Spreader nut |
| q | Check for damage and if necessary renew before fitting trim panel |
| 6 - | Cross-head screw |
| q | 1.2 Nm |
| 7 - | Cover |
| 8 - | Trim |
