Leon Mk2
Upper lining of B strut: removal and installation |
1 - | Retaining clip |
q | Four units |
q | Removal: |
– | Turn clip 90° and remove from its seating in strut B |
2 - | Lining |
q | Removal: |
– | Remove the side covers → Chapter |
– | Release lugs → Item and remove cap → Item |
– | Remove support fitting → Item |
– | Remove star head screw → Item |
– | Remove seat belt support bolts → Item |
– | Release the lining of support B, starting from the bottom |
q | Installing: |
– | Install in reverse order. |
3 - | Support fitting |
4 - | Hexagonal bolt |
q | 40 Nm |
5 - | Fitting lug |
6 - | Cap |
7 - | Star-head screw |
8 - | Safety belt support |
q | Secured by two star-head bolts |
9 - | Gasket |
q | After fitting the lining check that the seal is correctly seated |