Leon Mk2
| Lock carrier with moving components: dismantling and fitting |
| 1 - | Hexagonal screw |
| q | Four units |
| q | With washer |
| q | 8.5 Nm |
| 2 - | Lock carrier with moving components |
| q | Should be able to be fitted without any resistance |
| q | When fitting or removing, the wings of the vehicle should be protected to prevent damage. |
| q | Put in service position → Chapter, Lock carrier in service position: |
| 3 - | Threaded bolts |
| q | To secure the lock carrier to the bodywork |
| 4 - | Hexagonal screw |
| q | With washer |
| q | 6.5 Nm |
| 5 - | Retaining clip |
| 6 - | Front lining |
| 7 - | Washer |
| 8 - | Hexagonal screw |
| q | 3 Nm |
| 9 - | Spoiler |
| 10 - | Hexagonal screw |
| q | 3 Nm |
| 11 - | Washer |
| 12 - | Hexagon nut |
| 13 - | Hexagon nut |
| q | Four units |
| q | 20 Nm |
| Dismantling |
| – | Remove insulation tray if fitted → Chapter, Insulation tray: dismantling and fitting |
| – | Disconnect the Bowden cable from the lock → Chapter, Bowden Cable: dismantling and fitting |
| – | Separate the headlights, front indicators and the fog lamps if fitted → Electrical systems; Rep. Gr.94 |
| – | Dismounting the front bumper → Chapter, Front bumper; Assembly overview |
| – | Separate the intercooler hoses (according to versions) → 4 cyl. diesel engine; Rep. Gr.21 |
| – | Remove hexagonal screws -8- which secure the spoiler to the wings |
| – | Remove hexagonal screws -4-, and separate the front lining along with the spoiler |
| – | Remove the screws which secure the radiator condenser assembly to the lock carrier → Chapter, Radiator and condenser: unscrew |
| – | Secure the radiator and the condenser in the engine well |
Note!| Do not hang the the radiator condenser assembly from the hoses, and do not fold hoses |
| – | Remove the hexagonal screws -1- and the hexagonal nuts -13- |
| – | Separate the lock carrier forwards, taking care not to damage the paintwork on the wings |
| Installation |
| – | Centre the lock carrier by means of the sills between the wings |
| – | Install in reverse order |
| t | Spacings → Bodywork-repairs; Rep. Gr.00 |
| – | Adjusting the headlights and fog lamps if fitted → Electrical systems; Rep. Gr.94 |
