Leon Mk2
| Bowden Cable: removing and installing |
| 1 - | Bowden Cable |
| q | Removal: |
| – | Remove the screws from the handle → Item and from the lock → Item; unhook the action cable |
| – | Attach a wire (approx. 1000mm long) to the action cable nozzle (handle) and remove the action cable via the engine well |
| q | Installing: |
| – | Use the wire fitted in the dismantling to pull the cable |
| 2 - | Clip |
| 3 - | Sleeve |
| 4 - | Cover screw |
| 5 - | Actioning lever |
| q | Connected to the action cable |
| 6 - | Retaining clip |
| 7 - | Lock |
| q | Connected to the action cable |
| 8 - | Hexagonal screw |
| q | 12 Nm |
| q | If it is re-used: clean the screw thread with a wire brush and the nut thread with a bolt; apply security product -D 185 400 A2- to the screw |
