seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Interior handle: removal > < Dismantling

Leon Mk2

Installation
Installation
Follow the directions given in reverse order to disassemble, taking the following into account:
In vehicles with central locking, before fitting the handle, the connector rod pulley -1- should be vertical -arrows-.
   
–  Check that the staple -1- is not worn, and if it is replace it.
–  Turn the handle in such a way that it slides in the door carrier without leaving any air spaces -arrow-.
–  Apply sealant paste -AMV 188 200 03- to the screw -2- and screw it into its housing to a tightening torque of 8 Nm.
  E57-0013

Interior handle: removal > < Dismantling