seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Door handle: General installation diagram > < Front door: dismantling and fitting|Fitting

Leon Mk2

Front door: adjusting
Front door: adjusting
Special tools and workshop equipment required
   
t  Spacer feeler gauges to check adjustment -U-40807-
  W00-2275
t  Tool -U-30802- to adjust door
To correctly adjust the door the door hinge should be loosened from the strut. Other measures like adjusting the door upwards do not make sense. On pushing again, the door comes free again.
l  If the doors are correctly adjusted there is a uniform distance with respect to the door space, without being too far in or out and lined up correctly with the frame
–  Loosen the upper and lower hinge bolts until the hinge can be moved with the door fitted.
  W00-2171
–  Move the door using the over-sized spaces with tool -U-30802- and adjust the dimension of the opening with spacer feeler gauges -U-40807-.
–  Tighten the door hinge bolts to tightening torque 36 Nm.
–  Check adjustment; if necessary readjust.
  E57-0023

Door handle: General installation diagram > < Front door: dismantling and fitting|Fitting