seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Folding roof with exterior upholstery and cover: removing and fitting > < Removing

Leon Mk2

Installation
Installation
–  Fit the folding roof with the frame in the roof well.
   
–  Tighten the embedding frame with the folding roof frame (centre the embedding frame on the rear corners of the roof well with the two metric Torx bolts -arrows-, then tighten from back towards the front).
–  Replace the joint of the Folding roof motor -V86- and fit the motor (3.5 Nm).
–  Fit the moulded interior roof → Interior moulded roof with sunroof / deflector: removing and fitting; Rep. Gr.70
  E60-0004

Folding roof with exterior upholstery and cover: removing and fitting > < Removing