seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Complete folding roof: removing and fitting|Installation > < Complete folding roof: removing and fitting

Leon Mk2

Removing
Removing
–  Remove the moulded interior roof → Interior moulded roof with sunroof / deflector: removing and fitting ; Rep. Gr.70
   
–  Remove the cover -1- for the Folding roof motor -V86- and disconnect the connector of the Front interior light -W- .
–  Open the folding roof about 50 mm.
  E60-0002
–  Remove the connector -1- from the Folding roof motor -V86- .
–  Extract the attachment bolts -2- and disconnect the Folding roof motor -V86--3- and the joint -4- .
  E60-0003
–  Extract the embedding frame -1- (26 Torx T25 bolts).
–  Remove the folding roof with the frame -2- upwards and out of the roof well.
  E60-0009

Complete folding roof: removing and fitting|Installation > < Complete folding roof: removing and fitting