Leon Mk2
Folding roof: general installation overview |
1 - | Upholstery |
q | Removing and installing → Chapter |
2 - | Lining |
q | Removing and installing → Chapter |
3 - | Joint |
q | For replacement, the folding roof must be removed along with the upholstery and the lining → Chapter |
4 - | Runner |
q | For replacement, the folding roof must be removed along with the upholstery and the lining → Chapter |
5 - | Attachment guide |
6 - | Rounded head bolts |
q | 3.5 Nm |
7 - | Connecting piece |
8 - | Threaded bolt |
q | For attachment and adjustment of the folding roof |
9 - | Hexagonal bolt |
q | 10 Nm |
q | Self-locking |
10 - | Folding roof frame |
q | If necessary, the guide channels should only be impregnated with special grease → Parts catalogue otherwise proper operation is not guaranteed |
11 - | T25 Torx Screw |
q | 3.5 Nm |
q | Two units |
q | Metric thread for centring the folding roof frame |
12 - | Embedding frame |
13 - | T25 Torx Screw |
q | 3.5 Nm |
q | Self-drilling screw |
14 - | Strip |
15 - | Trim |
16 - | Roof spoiler |
q | Removing and installing → Chapter |
17 - | Protection strip |
q | Removing and fitting the roof spoiler → Chapter. |
q | Auto adhesive |
18 - | Hexagonal bolt |
q | 3 Nm |
19 - | Cover |
q | For the Front interior light -W- |
20 - | Hexagonal wrench for manual operation |
q | Secure using the clip to the Folding roof motor -V86- |
21 - | Folding roof motor -V86- |
22 - | Counter sunk bolts |
q | 3.5 Nm |
q | Always use new countersunk bolts |
23 - | Joint |
q | Renew |