seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Parallel operation of the guides: verification and adjustment > < Verification

Leon Mk2

Adjustment
Adjustment
   
–  Open the folding roof -2- about 100 mm and pull the crease on the roof rear -1- upwards.
–  Tighten or loosen equally, the hexagonal bolts -arrow- (2 units) located above the threaded pin.
–  Close the folding roof. The tension of the folding roof is correct when the side of the outside cover touches the framework with some pressure and the roof closes easily.
  N60-0016
If, despite the correct adjustment, the exterior part of the folding roof folds inwards, then the tension of the belts must be corrected
  N60-0027
–  Take the strip -1- out of the rear area of the roof well.
  E60-0007
–  Extract the cover of the folding roof -2- from the rear attachment guide -3-.
–  Loosen the attachment moulding -1- by the belt -4- and loosen the belt until, with the roof closed, the outside part does not fold inwards.
  N60-0028

Parallel operation of the guides: verification and adjustment > < Verification