seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Side impact airbag, driver/passenger: removal and assembly > < Airbag control unit J234 , removing

Leon Mk2

Airbag control unit J234, fitting
Airbag control unit -J234-, fitting
The operations for the fitting are carried out in reverse order to the removal, taking into account the following:
–  Tighten the bolts to a torque of 6 Nm.
–  Switch off all electrical components.
–  Switch ignition on.
–  Close vehicle windows.
–  Connect battery earth cable.
  DANGER!
On connecting the battery earth cable, ensure that there is no-one inside the vehicle .
  Note
t  On reconnecting battery, remember to activate vehicle equipment (radio/radio navigation system, clock, electric window risers) in line with → Instruction Manual.
   
t  If after assembly, the Airbag warning lamp -K75- lights up, the fault memory must be erased using the central diagnosis -VAS 5051- or the central diagnosis -VAS 5052-. After erasing the memory, consult the fault memory again → Vehicle diagnosis, testing and information system VAS 5051.
  E69-10017

Side impact airbag, driver/passenger: removal and assembly > < Airbag control unit J234 , removing